Parameters of Shock Absorber Seam Welding Machine
Equipment model: AFV-300JZ-G02
Rated capacity (50%): 300KVA
Using environment: temperature: 1~45℃ Humidity: 35~90%
Input power: 3 phase 380±10%V 50HZ
Maximum short-circuit current: 50KA
Air source pressure: 0.6~0.8MPa
Machine size: 1550×2010×2481mm
Equipment production cycle: about 12S/pc (excluding manual loading and unloading time)
Features of Automatic Welding of Shock Absorbers
- Install air pressure detection device: When the welding air pressure is insufficient, the system alarms and automatically shuts down.
- Monitoring system: The equipment is equipped with a monitoring system for welding pressure and air pressure to ensure the stability and uniformity of welding quality.
- With MES system communication interface: It can be connected to the customer’s on-site MES system to provide equipment data collection.
- Welding wheel grinding detection: The welding wheel relies on the servo motor to drive the gearbox to rotate; the welding wheel is equipped with a repairing knife holder outside, and the welding wheel is manually ground.
- Internal water cooling design: The welding transformer is cast with epoxy resin, with internal water cooling design, high load continuity rate, and can run continuously for a long time.
Why Choose Agera?
Agera is a leading manufacturer of resistance welding machines in China. We provide one-stop resistance welding solutions. Our welding machines are of reliable quality and have passed ISO quality certification and CE certification. We can not only quickly provide you with standard resistance welding machines, but also customize semi-automatic or fully automatic welding equipment for you.
Agera has an advanced machining center to ensure the rapid prototyping and installation of the welding machine structure. We have a complete product testing process to ensure that you receive a satisfactory machine. In addition, we have a strong technical team, insisting on R&D and innovation to design a more perfect machine for you. Our after-sales team is always ready to escort your normal production.
Advantages of Agera Shock Absorber Seam Welder
The weld surface is continuous and uniform, without obvious pits or deep indentations. The weld and its heat-affected zone have sufficient tensile strength and shear strength to withstand various dynamic loads during the operation of the shock absorber.
This double-station automatic seam welding machine adopts three-phase input, balanced power grid, and the current characteristics have both AC and DC characteristics. Its output frequency is adjustable, which is suitable for welding different materials without high-power rectifier diodes, and the system is more stable and reliable.
The equipment’s seam welding wheel adopts servo drive, which has high control accuracy and can realize closed-loop control of welding wheel speed and torque. The welding speed is stable to ensure the uniformity of the weld. It has fast dynamic response and is suitable for variable diameter welding of different shock absorber cylinders.
It uses servo motor drive, no hydraulic system energy consumption, and saves more than 30% energy compared to traditional drive.
More About The Welding Machine
- Welding Samples
- Video
Related Products
We have a series of machines for resistance welding, mainly including spot welders, projection welders, seam welders and diffusion welders. We can also produce automatic welding equipment.
We have a seam welding machine specifically for welding fuel tanks, which is not exactly the same as this one.
Sure, we have a very experienced technical team who can help you design a fully automatic welding production line.
Our products can be sold in every country. Please consult our sales team and we will provide you with a quote promptly.
Send your inquiry today
English 
Spanish 
Korean 
Russian 
French